EN10216 1 2 Tube for Pressure Purposes

European Standard

Tube for Pressure Purposes

Standard

EN10216-1

EN10216-2

Application

It is applied for manufacturing pipeline, vessel, equipment, pipe fittings and steel structure.

Main Steel Tube Grades

P195TR1, P195TR2, P235TR1, P235TR2, P265TR1, P265TR2, P195GH, P235GH, P265GH, 13CrMo4-5, 10CrMo9-10

Chemical Composition

St	Steel Grade	Chemical Composition%
		C	Si	Mn	P	S	Cr	Mo	Ni	Al	Cu	Nb	Ti	V
EN10216-1	P195TR1	0.13	0.35	0.70	0.025	0.02	0.30	0.08	0.30	/	0.30	0.01	0.04	0.02
	P195TR2	0.13	0.35	0.70	0.025	0.02	0.30	0.08	0.30	0.02	0.30	0.01	0.04	0.02
	P235TR1	0.16	0.35	1.20	0.025	0.02	0.30	0.08	0.30	/	0.30	0.01	0.04	0.02
	P235TR2	0.16	0.35	1.20	0.025	0.02	0.30	0.08	0.30	0.02	0.30	0.01	0.04	0.02
	P265TR1	0.20	0.40	1.40	0.025	0.02	0.30	0.08	0.30	/	0.30	0.01	0.04	0.02
	P265TR2	0.20	0.40	1.40	0.025	0.02	0.30	0.08	0.30	0.02	0.30	0.01	0.04	0.02
EN10216-2	P195GH	0.13	0.35	0.70	0.025	0.020	0.30	0.08	0.30	0.02	0.30	0.01	0.04	0.02
	P235GH	0.16	0.35	1.20	0.025	0.020	0.30	0.08	0.30	0.02	0.30	0.01	0.04	0.02
	P265GH	0.20	0.40	1.40	0.025	0.020	0.30	0.08	0.30	0.02	0.30	0.01	0.04	0.02
	13CrMo4-5	0.10-0.17	0.35	0.40-0.70	0.025	0.020	0.70-1.15	0.40-0.60	0.30	0.04	0.30	/	/	/
	10CrMo9-10	0.08-0.14	0.50	0.30-0.70	0.025	0.020	2.00-2.50	0.90-1.10	0.30	0.04	0.30	/	/	/

 

Mechanical Properties

 

Standard	Steel Grade	Mechanical Properties
		Tensile Strength MPa	Yield Strength MPa	Elongation %	Impact Energy J
EN10216-1	P195TR1	320-440	≥195	≥27	/
	P195TR2	320-440	≥195	≥27	≥40
	P235TR1	360-500	≥235	≥25	/
	P235TR2	360-500	≥235	≥25	≥40
	P265TR1	410-570	≥265	≥21	/
	P265TR2	410-570	≥265	≥21	≥40
EN10216-2	P195GH	320-440	≥195	≥27	≥40
	P235GH	360-500	≥235	≥25	≥40
	P265GH	410-570	≥265	≥23	≥40
	13CrMo4-5	440-590	≥290	≥22	≥40
	10CrMo9-10	480-630	≥280	≥22	≥40